Long night

2021.10.23 18:19 somecozyart Long night

submitted by somecozyart to DigitalArt [link] [comments]


2021.10.23 18:19 SilentMellow ODSMT and migraines

Tried 25mg of ODSMT for the first time yesterday. I took it orally. Was wondering if the headaches will go away. I was pretty sedated and slept amazing last night. I wasn’t really sure what to expect since it was my first opioid experience (that wasn’t in a hospital setting). I don’t want to use it everyday obviously…. Do I just need to get use to it. Can I take like ibuprofen before I take ODSMT to prevent the headache lol. (It was a awful headache btw) I’ve also heard that drinking water is very important - yeah I rarely drink water oops. I will do that now and try 25mg tonight or tomorrow.
submitted by SilentMellow to researchchemicals [link] [comments]


2021.10.23 18:19 Billy_The_Beholder Any books, movies, shows, etc. that feel like this? (DISCLAIMER: I do not own any of the following images)

Any books, movies, shows, etc. that feel like this? (DISCLAIMER: I do not own any of the following images) submitted by Billy_The_Beholder to BooksThatFeelLikeThis [link] [comments]


2021.10.23 18:19 PastaProgrammer All 15568 cards obtained!

submitted by PastaProgrammer to ptcgo [link] [comments]


2021.10.23 18:19 acidsiefer Crypto-Coin Mining Simulator | Play Games & Make Money!

Crypto-Coin Mining Simulator | Play Games & Make Money! Build your own crypto-mining operation, & earn money playing games.
That-Hill™ | RUNNING UP THAT HILL™
Use the link on my website for 1,000 FREE Satoshi, or 0.00001 Bitcoin FREE!:
That-Hill™ | Free Games & Online Income Avenues!
https://That-Hill.github.io/
RUNNING UP THAT HILL™
submitted by acidsiefer to bitcoingoals [link] [comments]


2021.10.23 18:19 Battler_2020 Out of boredom, I decided to draw a simpler interface. What do you think?

I completely removed the diagonal directions because it is very hard to aim on consoles, especially in combat. Instead, I suggest double stick movement. In addition, I have placed ammunition and health on two different sides since this is the most common use case for this interface.
Processing img 21m6sql5m9v71...
submitted by Battler_2020 to battlefield2042 [link] [comments]


2021.10.23 18:19 Lok1ez Who designs a building like this?

Who designs a building like this? submitted by Lok1ez to CrappyDesign [link] [comments]


2021.10.23 18:19 brentsgrl Advice-ADHD

I’m hoping some of you with more experience can offer some advice. I have ADHD. It’s become more and more of a struggle recently due to added/situational stress. I’d like to try the OTC route before I give in and get a script. What nootropic/combo most closely mimics the effects of adderall? I know adderall works as I’ve used it in the past. I know everyone is different and there may be a few options but I need someplace to start. Thanks in advance
submitted by brentsgrl to Nootropics [link] [comments]


2021.10.23 18:19 commandermelon2 Found a copy of zelda 1 signed by projared

Found a copy of zelda 1 signed by projared submitted by commandermelon2 to ConnorEatsPants [link] [comments]


2021.10.23 18:19 darwinDMG08 Advice needed: vertical concrete patch

Advice needed: vertical concrete patch This is a follow-up to an earlier post I made about my garage walls.
TLDR: vertical concrete patching sucks, need to find a better way!
My new house has a standalone garage that was originally framed out with roofing felt attached to the wood before they applied the wire and concrete for the walls. I starting stripping out the felt and was greeted with torrents of sand, as the cement has been crumbling for quite a while (probably due to water damage.)
I don't have intentions to use the garage for anything besides storage for now, but I did want to patch the spots with the worst damage for now, if only to shore up the walls from further erosion (I got a new roof on it so hopefully no more leaks) Because of how much we've spent on renovations I decided to try and DIY this one job, but when I actually got started it turned out to be a lot more work and materials that I anticipated. I'm hoping someone could recommend a quicker (and smarter) way to do this.
What I've done: I stripped off the felt across the lower sections of one wall and cleaned out the crumbling concrete and loose surface debris. On each "panel" (the sections between the wood frames) I apply a coat of concrete bonding adhesive, and then while it's still tacky I trowel on a layer of Quikrete Polymer structural repair. I did three panels before I got the hang of it, and before I realized that I had problems with this approach:
  • I ran through the 20lb. bucket of the polymer just to get three panels done with a very thin coat. There are 15 panels total.
  • Realizing I needed a lot more coverage, I used a concrete calculator and at 75 square feet (the remaining area) I would need a minimum of 240 lbs. of concrete to finish the wall and that's only with a .25" coating.
  • That's obviously cost-prohibitive with these small buckets (20lbs.) of the polymer base. But even so: I didn't expect to need so much concrete and the thought of picking up four 60 lb. bags of concrete mix is already making my back hurt.
  • Vertical application is HARD. I finally got the hang of it and started placing a dollop of concrete on a smoothing trowel and smearing it on the wall, but it was still difficult going. Sometimes it would stick and sometimes it would fly off. Many times I simply grabbed a handful and just smeared it on. Maybe the polymer mix was a bad choice because it dried so quickly and I found I had to work fast before it got too hardened to be sticky. It also doesn't help that I'm applying concrete to concrete and there's no wire mesh for it to stick to. The adhesive helps but it's not super tacky either.
  • Because I was fighting to apply it vertically, it took a long time to apply to each panel. I can see it taking me a full day just to finish the rest of the wall.
So with all that said (and thank you for reading this far), I need to ask: is there a BETTER WAY? Speficially: is there another material option I can use to patch/seal these walls? Preferably something that's easy to apply vertically, either with a spray or paint brush? Some type of sealant or polymer? Perhaps I only patch the biggest holes in the panels where chunks have fallen out, then go back and apply the coating? Or is there nothing to be done except roll up my sleeves and keep going with this?

https://preview.redd.it/vm21i5m4o9v71.jpg?width=960&format=pjpg&auto=webp&s=730e7d633fc9a16da2e495eb30fab4e84dd048d9
https://preview.redd.it/x5c4o7m4o9v71.jpg?width=1280&format=pjpg&auto=webp&s=7ab8904e233b121ff68d00794d858e0080d367af
https://preview.redd.it/11w5n8m4o9v71.jpg?width=1280&format=pjpg&auto=webp&s=14dc88eb2f9b90aae4cc974ca479a5a0a495b1f2
submitted by darwinDMG08 to DIY [link] [comments]


2021.10.23 18:19 NoxianForce [US-TX] [W] Cyber Dragons stuff [H] Paypal

Hello guys I’m looking to purchase some cyber dragon cards, I’m looking for:
1 Cyber Twin dragon- Secret 1 Chimeratech megafleet-secret 2 cyber dragon nova-ultra 2 cyber dragon infinity alternative art-ultra 3 cyber dragon core- super
If you guys have any of the listed cards above or maybe other cyber cards of interest tell me! Thank you guys!
submitted by NoxianForce to YGOMarketplace [link] [comments]


2021.10.23 18:19 CustomizedCD4 (stop searching for r34 bro)

(stop searching for r34 bro) submitted by CustomizedCD4 to CountryHumans [link] [comments]


2021.10.23 18:19 Mental_Employer_1788 need some help

need some help i do csgo edits and twixtorpro has started doing some bs + errors like this while im doing preview/rendering after finishing velocity. any idea how to fix it?
https://preview.redd.it/iz4nu204o9v71.png?width=1920&format=png&auto=webp&s=f5155539f395b875107ab6d7cb87eb2e1b0ae93b
submitted by Mental_Employer_1788 to editing [link] [comments]


2021.10.23 18:19 mrtinman Midi adapter for rockband 3 on wii

Hi guys, I have a rockband 3 on wii and would love to connect it to my edrum kit td-07. I understand you need a midi pro adapter (mad Katz) to connect the two. However this adapter seems difficult to source? Is it just a wait patiently until it pops up on ebay (Australia)? Are there any other options? I read about roll limitless but I don't think that is wii compatible?
Thank you
submitted by mrtinman to Rockband [link] [comments]


2021.10.23 18:19 repagator8 say no to dark pool

say no to dark pool submitted by repagator8 to amcstock [link] [comments]


2021.10.23 18:19 Background-Speech597 Muh genetics

Muh genetics submitted by Background-Speech597 to Cringetopia [link] [comments]


2021.10.23 18:19 mcnaughtized I am seriously confused…

I am seriously confused… submitted by mcnaughtized to Instagramreality [link] [comments]


2021.10.23 18:19 bat-bet Marseille vs PSG Match Preview & Prediction

https://bat-bet.com/marseille-vs-psg-betting-tips-predictions-match-previews-ligue1-24-10-2021/
submitted by bat-bet to betting [link] [comments]


2021.10.23 18:19 musicals4life Hoop houses complete! Bring on the cold

Hoop houses complete! Bring on the cold submitted by musicals4life to SquareFootGardening [link] [comments]


2021.10.23 18:19 SimplePhilosopher2 Make your offers pls

Make your offers pls submitted by SimplePhilosopher2 to MADFUT [link] [comments]


2021.10.23 18:19 TheLastFireExtinguis Funny Minecraft Bedwars Gameplay!

Funny Minecraft Bedwars Gameplay! submitted by TheLastFireExtinguis to shamelessplug [link] [comments]


2021.10.23 18:19 ZoobBot 181994

This is the 181994th time I made this shitty comment. I hate this job.
submitted by ZoobBot to shittyjobsforrobots [link] [comments]


2021.10.23 18:19 ApprehensivePain4195 Perfect sub for this

Perfect sub for this submitted by ApprehensivePain4195 to Dreamhate [link] [comments]


2021.10.23 18:19 BigDaddyD2093 Join the X3HL & Sinister Nation Community Discord Server!

Join the X3HL & Sinister Nation Community Discord Server! submitted by BigDaddyD2093 to NHLHUT [link] [comments]


2021.10.23 18:19 ibrahimumer007 How To Model Board Pin in SOLIDWORKS With Render in Keyshot |Scale Comma...

How To Model Board Pin in SOLIDWORKS With Render in Keyshot |Scale Comma... submitted by ibrahimumer007 to computergraphics [link] [comments]


http://osobnjak-spb.ru